Hope this helps. I have found that you have to hit it repeatedly too, but you don't want to hit it too fast or you may get a "keyboard error" if it's too soon and fast after POST. I usually hit it about every seconds once the POST is complete. Hope you get it! UYI , have you had any luck? On my systems after i get the double beep, i start pressing F8 like a madman. Anywhen before then i get into the scary RAID settings!! Otherwise someone could just boost up to Capsacin or Below Zero or whatever it just changed to by posting and answering a whole bunch.
To continue this discussion, please ask a new question. Privacy policy. This article provides steps to fix an issue in which machines can't boot into the normal mode and keep on restarting into the safe mode. Step 1: Close all programs so that you have nothing open and are at the desktop.
Step 2: Click the Start button, and then click Run. Step 3: In the Run field type msconfig as shown in the image below.
Yes No. Thank you! Any more feedback? The more you tell us the more we can help. Can you help us improve? Resolved my issue. Clear instructions. Easy to follow. No jargon. Pictures helped. Didn't match my screen. You can use this tool to change the system configuration and troubleshoot the problem by using a process-of-elimination method.
You must be logged on as Administrator or as a member of the administrative groups to use System Configuration Utility. If your computer is connected to a network, network policy settings may prevent you from using the utility. As a security best practice, consider using the Run as command to perform these procedures. We recommend that you don't use System Configuration Utility to modify the Boot.
To test the software loading process, make sure that the Load Startup Items check box is selected, and then select OK. Clear all the check boxes under Selective Startup. INI check box. Repeat this process and select each check box one at a time. Restart your computer every time. Repeat the process until the problem occurs. When the problem occurs, select the tab that corresponds to the selected file. For example, if the problem occurs after you select the Win. The Startup tab lists items that load at startup from the Startup group, Win.
To isolate problems by using the Startup tab, follow these steps. To start troubleshooting, select the first check box, select OK, and then restart the computer when you're prompted.
Repeat steps 5 through 8 for each service until the problem occurs. When the problem occurs, you'll know that the last service that you turned on is causing the problem. Note this service, and then go to step Select Enable All, the check box next to the faulty service, clear the check boxes of any other services that you noted in step 3, select OK, and then restart your computer.
As a workaround, you can leave the faulty service turned off not selected. Contact the manufacturer of the faulty service for more assistance. You may be able to determine more quickly which service is causing the problem by testing the services in groups.
Divide the services into two groups by selecting the check boxes of the first group, and then clearing the check boxes of the second group. Restart your computer, and then test for the problem.
If the problem occurs, the faulty service is in the first group. If the problem doesn't occur, the faulty service is in the second group. Repeat this process on the faulty group until you have isolated the faulty service.
Note any items that aren't selected. You might have to expand some items such as [drivers] to determine whether any subitems aren't selected. When the problem occurs, you'll know that the last item that you turned on is causing the problem. Note this item, and then go to step Select Enable All, clear the check box next to the faulty item, clear the check boxes of any other items that you noted in step 3, select OK, and then restart your computer.
As a workaround, you can leave the faulty item turned off not selected. If it's possible, contact the manufacturer of the faulty item for more assistance. You may be able to determine more quickly which System. Divide the items into two groups by selecting the check boxes of the first group, and then clearing the check boxes of the second group.
Repeat this process on the faulty group until you have isolated the faulty System. You might have to expand some items such as [OLFax Ports to determine whether any subitems aren't selected.
Select Enable All, clear the check box of the faulty item, clear the check boxes of any other items that you noted in step 3, select OK, and then restart your computer. You may be able to determine more quickly which Win. Repeat this process on the faulty group until you have isolated the faulty Win. Only system administrators and advanced users should try to change the Boot.
Steps for troubleshooting Boot. The Recovery Console is a command-line tool that you can use to repair Windows if the computer doesn't start correctly. Use the Recovery Console if the Last Known Good Configuration startup option was not successful, and you can't start the computer in safe mode. We recommend that you use the Recovery Console method only if you're an advanced user who can use basic commands to identify and locate problem drivers and files.
0コメント